 |
Investigation on the failure of a turbine
blade of unit No.4 at KTPS |
|
RLA Study of 2X120MW(Unit 3&4)
Amarkantak TPS & MPEB |
|
Structural Integrity and Remaining Life
Assessment |
|
Development of nano crystalline soft
magnetic materials |
|
Instrument Development Programme
Development of magnetic sensor for material characterisation |
|
Development of techniques for evaluating
mechanical properties and fracture toughness parameters |
|
Micromagnetic study on ferromagnetic
materials |
|
Investigation on the effect of internal
stress of a magnetic properties of Amorphous materials |
|
Synthesis and sintering of titanium dioxide
for industrial application |
|
Development of ultra low carbon bainitic
steels for off-shore & on-shore structures |
|
Relationship between microstructure and
ultrasonic attenuation in Ti alloy and Ni alloys |
|
Magnetic Evaluation of Fatigue Damage and
Deformation (INDO-US Collaboration Project) |
|
Biomimetric Synthesis of Inorganic
Materials under microgravity |
|
Effect of thermo mechanical treatment on
X-Ray elastic constants in steels |
|
Biomimetric route to synthetic composite |
|
Hard coating of Ti/Zn diboride and carbon
nitride by sputtering |
|
Acoustic emission testing of LPG Horton
Sphere |
|
Development and Characterisation of bulk
amorphous and nano-crystalline ferro-magnetic materials |
|
In situ biomimetric synthesis of protein
based nanosized hydroxyaptite - protein - polymer composites |
|
Development of toughened zirconium ceramics
for tribological applications |
|
RLA Studies of Boiler unit -
5&6(2X120MW) of MEBP, Korba East |
|
Remaining life study of reactor vessel
003V-108 in CCU |
|
RLA and life extension study of unit 8,
100MW of "A" TPS Orba UPSEB |
|
Fatigue Crack Propagation studies on
primary heat transport system piping material |
|
Development of advanced reformer tube
alloys |
|
Cyclic integral evaluation of various
nuclear grade carbon manganese steels |
|
Evaluation of Fatigue and Fracture
Properties of HSLA Steel |
|
Evaluation of role of inclusions on
ductility and fracture properties of HSLA-100 and other high strength
Steel |
|
Thermomechanical characterisation of
ceramic coating for combustion chamber liners/combustors lines |
|
Thermomechanical modeling in crack
propagation studies of thermal barrier coating in power plant
application |
|
Development of rapid solidification
technology for Mg.alloys |
|
Development of plough share and other
agriculture tool, with improved properties |
|
Science & technology inputs to
practicising blacksmiths of rural sectors |
|
Development of low cost bamboo components
as structural material |
|
Development of an appropriate technology
for traditional brass & belt metal artisan |
|
Synthesis & Characterization of AlN-SiC
Composites |
|
Development of Iron making processes used
by tribal of India. |
|
Non-editable veg. oil in mould\core making
and preparation of resins |
|
Preparation and Characterization of in situ
High Temperature Ceramic Matrix Composites |
|
Development of low silver brazing alloys
for joining ceramic to metal |
|
Improvement of the properties of cast
Al-alloy by application of electric or magnetic field during
solidification |
|
Development of Aluminum Alloy Matrix
Composite Plates for Defense Applications |
|
Synthesis of Silver based alloys for
metal/ceramic brazing |
|
Studies on thermal characteristics of LCA
Brake Sample |
|
Development and tailoring of properties of
Al based amorphous alloys through evolution of nanophases |
|
Synthesis of Nd-Fe-B magnet alloy powder by
chemical route |
|
Development of low silver alloy for joining
ceramic to metal/ceramic |
|
Synthesis of high purity nano crystalline
ZnS powder by gas condensation technique |
|
Development of mixed metal powder for
diamond polishing wheel |
