| NAME |
DESIGNATION |
SPECIALIZATION |
| Prof. S.P.
Mehrotra |
Director |
Process
Metallurgy, Mathematical Modeling and Simulation of Mineral and
Metallurgical Process; Process Design, Development and Control;
R&D Planning and Management |
| ACC
Dvision |
|
|
| Dr.S.Bhattacharjee |
Scientist
F & Head |
Analytical
Chemistry, Environmental Chemistry |
| Dr.J.K.Sircar |
Scientist
EII |
Analysis
of Gases in Metals; Water Analysis; Electro-chemistry; Gas
chromatography and Mass Spectrometry; Conventional Analysis;
Chemical Kinetics |
| Shri
A.K.Bhattamishra |
Scientist
EII |
Chemistry,
Waste Utilization |
| Dr.D.D.N.Singh |
Scientist
EII |
Inhibitor,
Corrosion Engg.l |
| Dr.I.Chattoraj |
Scientist
EII |
Metallurgy,
Corrosion Failure |
| Dr.T.B.Singh |
Scientist
EII |
Physical
Chemistry, Inhibitor |
| Shri M.N.Singh |
Scientist
EI |
Inhibitor,
Coatings, Atmospheric Corrosion |
| Dr. R.Singh |
Scientist
C |
Corrosion
Science |
| Dr. P.C.Ghosh |
Scientist
B |
Inhibitor;
Electrochemistry |
| ANC
Centre |
|
|
| Shri K.K.Gupta |
Scientist
F & Head |
Trace
Metal Analysis by Instrumental Method |
| Dr.M.K.Mohanta |
Scientist
C |
Conventional
analysis |
| Dr.(Ms).S.Chakravarty |
Scientist
C |
Analytic
Chemistry |
| Dr.N.N.Das |
Scientist
C |
Catalysis;
Chemical Kinetics |
| Dr.(Ms.)S.Gorai |
Scientist
B |
Organic
Chemistry; Bio-technology |
| BDM
Division |
|
|
| Dr.S.Prakash |
Scientist
F & Head |
High
Temperature Reactions Kinetics; Computational fluid dynamics and
application of these concepts to the assessment and development of
novel/Newer Ferrous Process |
| Dr.(Ms.)K.Chatterjee |
Scientist
EII |
Molecular
Physics; Information & Communication; Marketing system,
Accreditation and Testification |
| Dr.P.N.Chaudhary |
Scientist
EII |
Process
Metallurgy (Ferrous); Feasibility Studies; Marketing |
| Dr.K.L.Hansda |
Scientist
EI |
Testification,
Training, Information and communication, composite material &
rural development |
| Shri S.K.Pal |
Scientist
C |
Intellectual
property management, Information Management, Project Monitoring |
| Ms.A.Madhukar |
Scientist
B |
Liaison
and Techno-commercial Negotiation, Information Management,
Technology Marketing & Business Development |
| ENG
Division |
|
|
| Shri A.K.Mallik |
Scientist
F & Head |
Project
Engineering Management; Prototype Development; Circuit Engineering;
Mineral Beneficiation, Modernisation and Augmentation of Facilities |
| Shri P.N.Mishra |
Scientist
EII |
Analytical
& Process control instrumentation, calibration, Expert system |
| Dr.S.K.Mondal |
Scientist
EII |
Control
system; Electronic circuits and computers |
| Shri K.K.Paul |
Scientist
EII |
Equipment
Design and Fabrication; Prototype Development; Modernisation and
Augmentation of Facilities; Material Handling Equipment Design |
| Dr.N.V.Satyanarayana |
Scientist
EII |
PC
based instrumentation, Computer Networking, Artificial Intelligence,
Calibration Real Time System |
| Shri A.Dutta |
Scientist
EII |
Structural
Engineering, Computer Aided Design and Analysis of structure |
| Shri I.B.Mishra |
Scientist
EII |
Structural
Engineering; Construction Management |
| Dr.S.A.Akbar |
Scientist
EII |
Microprocessor
based system design; PC based data acquisition & control;
digital signal processing |
| Shri Parvesh Kumar |
Scientist
EI |
Electrical
systems |
| Shri D.K.Mishra |
Scientist
EI |
Microprocessor;
Micro controller based designs, digital clock |
| IMDC
Centre |
|
|
| Dr.N.G.Goswami |
Scientist
F & Head |
Ecology
& Environ Sc;MIS,Editing, Publications and Publicity, Business
Promotions; Technology Marketing, Library Administration &
Management |
| Shri P.N.Mishra, |
Scientist
B |
Information
management & dissemination |
| MEF
Division |
|
|
| Dr.R.P.Goel |
Scientist
F & Head |
Process
Metallurgical Research; Thermo dynamic behaviour of slag and metal
system; high temperature phase and chemical equilibria; process
analysis, modelling & optimization |
| Dr.K.K.Singh |
Scientist
G |
Development
of newer refractories for ferrous and non ferrous industries;
Advanced ceramics; high strength ceramic composites, high
temperature ceramic coatings; solid waste utilis |
| Dr.A.Bandopadhyay |
Scientist
F |
Direct
reduction/smelting reduction process of iron making; Directionally
oxidized ceramic matrix composites; plasma assisted CVD; kinetics
& process modelling |
| Dr.Vinay Kumar |
Scientist
F |
Extraction
of non-ferrous metals; roasting & leaching of ores/
concentrates; separation of metals by solvent extraction |
| Dr.A.K.Vaish |
Scientist
F |
Fluidization
engg. transfer process DRI Iron and Ferro-alloy Making; Modelling
scale up and design of chemical and metallurgical systems |
| Dr. B.D.Pandey |
Scientist
F |
Hydrometallurgy,
Leaching; Solvent Extraction; Electrowinning and Roasting of
sulphides |
| Dr.R.K.Jana |
Scientist
F |
Hydrometallurgy;
Leaching; Electro-Leaching Solvent Extraction |
| Dr.P.K.Biswas |
Scientist
F |
Materials
Processing |
| Dr.D.S.R .Murthy |
Scientist
F |
Non-Ferrous
Extractive Metallurgy: Pyro/Hydrometallurgy |
| Dr.A.Prodhan |
Scientist
EII |
Alloy
Development; Solidification; Creep Testing |
| Dr.S.D.Singh |
Scientist
EII |
Ferrous
process pretreatment of Hot Metal/Secondary Steel Making/Bath
Smelting |
| Shri M.C.Goswami |
Scientist
EII |
Iron
making/physico chemical characterisation of iron ore, sinter
pellet/sponge iron production in VRF/Resiness Process/smelting
reduction of fluxed blue dust |
| Shri R.K.Minj |
Scientist
EII |
iron
Powder Production by Atomization Foundry; Ferro Alloy, Iron Making
& Steel Making |
| Dr. D.Bandopadhyay |
Scientist
EII |
Kinetics;
Iron Making and Mathematical Modelling |
| Dr.S.Ranganathan |
Scientist
EII |
Metallurgy;
Thermodynamics and kinetics, |
| Dr.Rakesh Kumar |
Scientist
EII |
Process
Mineralogy; Hydrometallurgy |
| Shri S.K.Malaviya |
Scientist
EII |
Refractories;
Advanced ceramics |
| Shri P.K.De |
Scientist
EI |
Alloy
Development; Metal working; Mechanical Testing of Metals & its
alloys |
| Dr.(Ms.)A.Agarwal |
Scientist
EI |
Extractive
Metallurgy; Solvent Extraction, Ion exchange |
| Dr.A.Dasgupta |
Scientist
C |
Extraction
Metallurgy |
| Shri M.M.Humane |
Scientist
C |
Ferro
alloy steel making and Foundry |
| Dr.K.K.Sahoo |
Scientist
C |
Hydrometallurgy;
Process Development Fine particle synthesis and waste management |
| Dr.(Mrs.)M.Chakraborty |
Scientist
B |
Extraction
Metallurgy; Pyrometallurgy and Hydrometallurgy; Kinetics of the
process metallurgy |
| Shri J.Pal |
Scientist
B |
Ferrous
Processing |
| Shri K.D.Mehta |
Scientist
B |
Hydrometallurgy
and Bio-Hydrometallurgy |
| Shri T.C.Alex |
Scientist
B |
Mineral
Beneficiation, Pyro-Metallurgy |
| Dr. S.Prasad |
Scientist
B |
Non-Ferrous
Metal Extraction from Ore and Waste |
| Dr.(Ms.) J..Hait
Biswas |
Scientist
B |
Non-ferrous
processing |
| MMS
Division |
|
|
| Dr.K.M.Godiwalla |
Scientist
G & Head |
Modelling
of metallurgical processes; Transport phenomena:, Electromagnetiocs |
| Dr.S.K.Das |
Scientist
EII |
Process
Modelling; Transport and Rate M.Sc. Phenomena; CFD, Magneto-hyrors
dynamics Electro magnetic and MHD Plasma |
| Dr.S.K.Sondhi |
Scientist
EI |
Atomic
scale modelling; deformation behaviour |
| Ms.M.Tarafder |
Scientist
EI |
Finite
Element Method; Fracture Mechanics |
| Dr.(Ms.)N.Roy |
Scientist
EI |
Optimization
techniques; Statistical Analysis; Application of FEM |
| Shri B.Dash |
Scientist
C |
Software
Development Distributed Processing: Image Processing Neural Network |
| Ms.S.Hore |
Scientist
B |
Scientific
Software Design and Development, Database Management System |
| MNP
Division |
|
|
| Shri
J.P.Srivastava |
Scientist
F & Head |
Particle
characterisation; Beneficiation and agglomeration flow sheet design
and lay out. |
| Shri S.C.Maulik |
Scientist
G |
Mineral
beneficiation & agglomeration |
| Dr.K.K..Bhattacharya |
Scientist
F |
Beneficiation
of low grade ores and minerals; agglomeration |
| Dr.P.K.Bhattacharya |
Scientist
F |
Beneficiation
of low grade ores and minerals; waste treatment; Mathematical
modelling application |
| Dr.R.P.Bhagat |
Scientist
F |
Non-sulfide
Ore Beneficiation fine particle processing & agglomeration
statistical analysis |
| Dr. K.V.Rao |
Scientist
EII |
Geology,
Mineral Processing |
| Dr. Ratnakar Singh |
Scientist
EII |
Mineral
Processing; Surface science |
| Shri P.Saha |
Scientist
EII |
Production
of Magnesium Metal; Mineral Beneficiation |
| Shri S.K.Sil |
Scientist
EI |
Mineral
Processing and agglomeration |
| Dr. B.Nayak |
Scientist
C |
Mineral
Characterisation Geology |
| Dr.
A.Chattopadhyay |
Scientist
C |
Mineral
characterisation, Geology |
| Dr.(Ms.)S.Dey |
Scientist
C |
Mineral
Processing |
| MST
Division |
|
|
| Dr.R.N.Ghosh |
Scientist
G & Head |
Modelling
of materials , behavior (creep and fatigue) Failure analysis
Remaining life assessment |
| Dr.R.Singh |
Scientist
G |
Creep
fracture, creep life extension and failure analysis |
| Dr.S.Choudhuri |
Scientist
F |
Creep
evaluation, life prediction, application of computer software and
modellilng; creep behaviour failure investigation |
| Dr.S.Ghosh |
Scientist
F |
Foundry
Engineering; Cast Iron Metallurgy and Molding Materials; Metal Based
Rural Development Programme |
| Dr.A.K.Ray |
Scientist
F |
High
Performance Ceramic Fabrics; Ceramic Matrix Composites |
| Dr.S.P.Chaudhuri |
Scientist
F |
Mechanical
Metallurgy, Materials Processing, Iso Quality Management;
Installation, Testing and Commissioning of Industrial Plants;
Construction & Maintenance Management |
| Dr.S.R.Singh |
Scientist
F |
Phase
Transformation; Alloy Development |
| Dr.V.V.Rao |
Scientist
F |
Physical
Metallurgy |
| Dr.(M s.)A.Bahadur |
Scientist
F |
Solidification,
Phase Transformation; X-ray Diffraction; Corrosion Protection |
| Dr.A.K.Ray |
Scientist
EII |
Fatigue
& fracture creep life prediction, Mechanical Properties of
Advanced ceramics; Thermal barrier coatings; Modelling Remaining
LIfe Assessment studies |
| Dr.N.Parida |
Scientist
EII |
Fatigue
Damage; Acoustic Emission Testing |
| Dr.S.Tarafder |
Scientist
EII |
Fracture
Mechanics, Failure analysis component integrity evaluation |
| Dr.A.Mitra |
Scientist
EII |
Magnetic
Materials; Magnetic Non destructive testing; Sensors; Amorphous
Materials; Phase Transformation |
| Dr.L.C.Pathak |
Scientist
EI |
Nano
crystalline Materials; Powder Metals
and composites |
| Dr.G.Das |
Scientist
EI |
Physical
Metallurgy; Non-Destructive Testing; Mechanical Metallurgy |
| Dr.A.Sinha |
Scientist
EI |
Quasi
Crystal Rare Earth Magnets; Biomimetic synthesis |
| Dr.(Ms.)S.K.Mishra |
Scientist
EI |
Thin
film super conductivity, high temperature materials |
| Dr.K.L.Sahoo |
Scientist
C |
Alloy
Development Al alloys; Metallic glass; Materials Processing |
| Dr.S.Ghosh
choudhury |
Scientist
C |
Crystallographic
texture development deformation processing ; phase transformation
intermetallilcs |
| Dr.S.Sivaprasad |
Scientist
C |
Fracture
Mechanics |
| Ms.L.S.Palit sagar |
Scientist
C |
Magnetic
Material; Non-destructive testing; sensor development |
| Dr.J.Swaminathan |
Scientist
C |
Materials
Evaluation |
| Dr.K.Venkateswarlu |
Scientist
C |
Mechanical
Metallurgy; Powder composites |
| Dr.G.V.S.Murthy |
Scientist
C |
Mossbauer
spectrometry; Ultrasonic |
| Shri S.K.Das |
Scientist
C |
Physical
metallurgy; failure analysis |
| Dr.G.Sridhar |
Scientist
C |
Structure
property correlations; Electroslag clast cladding |
| Shri B.Ravi Kumar |
Scientist
C |
XRD;
Residual Stress Analysis |
| Sgri J.K.Sahu |
Scientist
B |
Fatigue
& Fracture, Sheet Metal Forming |
| Dr.(Ms.) Ansu
J.Kailath |
Scientist
B |
Materials
Synthesis and characterisation; Infra Red and Optical Simulated
Luminescence Dating; Electron Spin Resources dating |
| Shrin
V.C.Srivastava |
Scientist
B |
Rapid
solidification spray forming; composite materials |
| Dr. P.Kumar |
Scientist
B |
Ultrasonic
and Acoustio Ultrasonics |
| NML-FS,
Ahmedabad |
|
|
| Dr.S.K.Tiwari |
Scientist
C, In-charge |
Corrosion
Protection |
| Dr.T.Mishra |
Scientist
B |
Mineral
Processing |
| NML-MC,
Chennai |
|
|
| Dr.S.Srikanth |
Scientist
F, In-Charge |
Thermodynamics,
Measurements; Computational; Thermochemistry and Extraction Process |
| Dr.G.Bhaskar Raju |
Scientist
EII |
Mineral
Processing |
| Dr.S.Prabhakar |
Scientist
EII |
Mineral
Processing |
| Shri S.Subba Rao |
Scientist
EII |
Pollution
Control and Calibration+D131 |
| Shri TC Manoharan |
Scientist
EI |
Metallography
and Tiles Testing |
| Dr.D.S.Rao |
Scientist
EI |
Mineral
Procesing; Applied Mineralogy |
| Dr.T.S.N.Sankara
Narayanan |
Scientist
B |
Electrochemistry;
Metal Finishing & Chemical Analysis |
| Shri TVV Kumar |
Scientist
B |
Metallurgy |
| Shri
K.Gopalakrishna |
Scientist
C |
Power
Metallurgy; Surface Engineering and Material Characterisation |
