Hot Rolling and Cold Rolling of High carbon Low
alloy steels.
Hydrothermal Synthesis and Characterisation of
pure and doped boehmites
Hydrothermal synthesis of metal powder and oxide
with and without microwaves
Improvement of Cobalt extraction from roast
reduced Polymetallic sea noudles in ammoniacal
solution
Improvement of reduction roast ammonia leach
process of NML for recovering valuable metals
from polymetallic sea nodules.
Improving longevity of tubewells in rural areas
of Jharkhand
Improving the zinc efficiency and better
uniformity of coating
In situ systhesis of metallic and intermetallic
nanoparticles with controlled dimensions and
topography for biomedical applications.
Influence of saline environment on stress
rupture life of Ni-alloy GTM-SU-263 used as a
structural material in Kaveri Gas Turbine
Engine.
In-situ Activation-Leaching and Ex-Situ
Activation Pressure Leaching of Zircon in Acid
and Alkaline Solution
Installation of Iron Removal Unit
Interaction of phases in Mechanically Treated
Multi-component Sytems
Investigation for root cause of pump wear & tear
failure
Investigation of Iron ore Blast Furnace
operation
Investigation of thermal properties of composite
samples
Investigation of transmission line hardware,
earth wire, ACSR conductor at low temperature.
Investigation on coated steel panels
Investigation on granite specimens
Investigation on Samples of R.P.Iron & Steel Pvt
Ltd, Kolkata
Investigation report on failed pieces of hydro
generator of Sabarigiri Power Project
Investigations on the production of high purity
TiO2 from ilmenite through selective reduction
and seggregat
Investigations on the thermo-chemistry of the
interaction of chromite spinels and silica under
different conditions
Ionic Conductivity Measurement on novel
electrolyte and electrode material for solid
oxide fuel cells
Low Cycle fatigue(LCF) Behaviour of Ni-alloy
GTM-SU-263 used as structural material in kaveri
Marine Gas Turbine Engine: influence of saline
environment.
Low Temperature Sensitization Studies on SS 304
LN Stainless Steel Materials
Material equivalence of Russian materials for
invar missile
Materials Characterisation of steel Forging
stock of MIPSL
Mechanical activation of Boehmite and its effect
on alkali leaching
Mechanical testing of crowbars
Microbial leaching of uranium from Narwapahar
ore
Microlevel water quality and ground water
monitoring in and around SIPCOT industrial area.
Microstructural and textural evoluation during
recrystallization of cold rolled Al-Mn-Mg alloys
Microstructural Characterization Ni-base Super
Alloy.
Microstructural characterization, evaluation of
mechanical properties and determination of
electrical conduc
Microstructure texture and Mechanical properties
of Bulk Ultrafine Aluminium Produced by
Accumulative Roll Bonding.
Mineralogical characterization of iron ore
samples from Goa
Mineralogical studies of iron ore sample
Mitigation of fireside corrosion of air
preheater tubes in CFBC boiler fired with
lignite at SLPP
Nano Structured Advanced Materials
Nanocomposite thin films of Si-C-N system for
wear resistance and functional application by
magnetron sputte
Nano-Crystallisation studies on Cobalt
containing bulk metallic glass
Nano-wire procuced by borohydride reduction
process
Need Analysis for the establishment of a
metallurgical labortaory for failure analysis
and corrosion Assessment at CARIRI
Opinion on Patentability of a patent on steel
composition
Opinion on the cause of damage of lost stage of
37 MW steam turbine of Monnet Ispat & Energy Ltd
Opinion on the development of gamma TiAl alloys
Optimisation of ageing parameters and alloy
compositions for improved age hardening response
of AZ91 Mg allo
Optimisation of specific power consumption in
the production of ferro-chromium
Optimization of polymer hydrogel based three
domensional hybrid biomimmetic scaffold for load
bearing orthop
Paint System for Extended Maintenance Free Life
of Steel Structures
Pelletisation of magnetite Ore
Peparation of secondary standards for raw
materials testing
Peridical variation of hardness testing
meachines
Physico chemical studies on the oxide mineral
systems in the presence of surfactants and
polymers for beneficiation of iron ores.
Pilot plant beneficiation of iron ore fines
Pilot scale column flotation studies on the
beneficiation of iron ore fines from Joda &
Noamundi of TISCO
Pilot Scale Smelting and pre-feasibility studies
on Nickel-Chromuim-Cobalt bearing Magnetite Ores
of Nagalan
Pilot scale smelting of ferrosilicon from copper
smelter and converter slag
Polymetallic sea nodules and Co crust of Indian
Ocean: A mineralogical and geochemical
investigation
Polymetallic sea nodules and Co crust of Indian
Ocean: A mineralogical and geochemical
investigation
Prediction of formation of amorphous phases
during annealing of Ti-binary alloys and
validation of the same
Preparation and characterisation of
nanocrystalline materials for high temperature
soft magnetic applicstion
Preparation of hollow SiO2 and TiO2 nano
particles in reverse microemulsion system
Preparation of super alloy certified reference
material
Process analysis for the production of ferro-chromium
at the Plants of TICOL, New Delhi
Processing of nickel-cadmium spent battery
Production of Low Phosphorus Steel Using DRI
through Induction Furnace Route adopting
innovative fluxes and/or design (refractory)
change.
Production of Wear Resistant Ceramics from Fly
Ash
Providing safe drinking water in rural areas
using Solar Disinfection Technique
Recommendation for controlling Chromium in
Ferrochromium Slag
Recovery of lead from Zinc plant residue.
Recovery of Pb and Sn from the liberated resin
of PCB's swelled by organic.
Recovery of valuable metals from sea nodules by
reduction smelting matte formation - ammoniacal
pressure leaching hydrothermal reduction route.
Recovery of valuable metals from sea nodules by
reduction smelting route
Recovery of Valuable metals from tungsten
containing alloys scaps using hybrid
hydrometallurgical process
Recycling of electronic waste
Reduction of by product generation during
galvabizing process
Reduction of coke rate using probing and
modeling techniques in BF no : 6 and BF. No : 7
of Bhilai Steel Plant
Reduction of iron contamination in quartz
Reduction of iron ore at low temperature using
heat source available in a steel plant
Removal of hazardous metal elements from leach
liquor of electronic scraps by solvent
extraction
Residual Life Assessment of service exposed
primary reformer tubes
RLA of NHQU heater tube
RLA of reformer tubes and pigtail tubes.
RLA Study of cooling water header at Power Plat,
DSP
RLA study of reactor, stripper and fractionators
columns
Role and contribution of coke in mini blast
furnace for production of pig iron
Role of mechanical activation in chemical
beneficiation of red mud
Selective reduction of Cu, Ni & co from Aqueous
Solutions Through Hydrothermal Route for
Production of Metal Powders.
Self propagating high-temperature sintering of
LD sludge for recycling
Solvent extraction and separation of cobalt and
zinc from ammoniacal solution
Solvent extraction of Ag & Gold using reverse
micelles on N-acfylamino acid surfactants,
Solvothermal synthesis of high value
metal/oxide/ferrite powders from secondary
resources
Stability of Structure and magnetic properties
of nanostructured alloys produced by rapid
solidification technique.
Stochastic and non-destructive assessment of
corrosion pit growth in airframe alloys.
Strain hardening behaviour of Al-Sc alloys
Stress Rupture & Mechanical test for boiler
tubes
Stress, Texture and Phase transformation in
Ultra-thin hexagonal metallic thin films:
Examples: Titanium and magnesium.
Studies on cement tiles
Studies on characterisation of mine samples
Studies on corrosion resistance properties of
coated steel products
Studies on creep and deformation behaviour of
steel using magnetic NDE technique.
Studies on Creep behaviour and Statistical
analysis of service exposed P-22 Grade of steel.
Studies on Dispersion and Selective Flocculation
of Fine Raw Coal Particles for Removal of Ash
Studies on metal powder
Studies on reactivity of classified fly ash
Studies on recovery of manganese as Fe-Si-Mn
from low manganese containing materials
Studies on skid resistance and colour fading of
cement tiles.
Studies on the behaviour of fluxed iron bearing
pellets in representative basic oxygen steel
making processs
Studies on the electrochemical behaviour of
Ti-Mo alloys in fluoride medium to assess their
suitability for
Studies on the fretting corrosion behaviour of
titanium alloys and development of fretting
corrosion maps
Studies on the geopolymerisation of fly ash with
and without granulated blast furnace slag
Studies on vitrified tiles/ceramic tiles
Studies on Zeta-Potential of Iron ore samples.
Studies, characterisation and improvement of
cold galvanized reinforced bars
Study of GMI in Soft ferromagnet for sensor
applications
Study of particle dynamics and development of
control strategy for improved performance in
teeter bed separator
Study of the influence of the welding heat
inputs, nitrogen contents and deformations on
low temperature sen
Study on (Non) Masing Behaviour in Structural
Steels
Study on Deformation behavior of TWIP Steel by
Acoustic Emission
Study on ductile fracture of SA333 Gr.6 PHT
piping material
Study on Giant Magneto-Impedance behaviour in Co
and Fe based nano-structured materials.
Study on leachability on the granulated slag in
sea water
Study on the aspects of cavitation erosion and
slurry erosion behaviour of materials.
Study the effect of processing parameters on
structure property relationship of new
generation interstitial
Suggesting proper coating and steel for rebars
for use in MESEB Hydroproject
Surface Modification of Steels through
Boronizing and study the Tribological Properties
Synthesis and investigation of piezo-composites
for underwater transducer application
Synthesis of novel polynuclear heterocyclic
compounds and their study as potential corrosion
inhibitors
Technical opinion on classification of imported
metallurgical consignments
Technology Development for Geopolymer Pavement
Tiles from Fly Ash.
Technology for assessment and refurbishment of
engineering materials and components
Temperature control of creep furnace using
Mamdani-type Fuzzy PID controller
Test of Cr Ni Alloy Tubes (Naphtha Cracker
Tubes)
Testing and certification of double cold reduced
tinplates
Testing of newly developed single reagent scheme
for coal flotation
Thermal Conductivity study of VSSC samples
Thermodynamics of the Inverse melting Phenomenon
in Binary Alloys: Experimental Studies and ab
intio simulation
Thermomechanical characterisation of ceramic
coating for turbine blade materials
To improve zinc utilisation factor for wire
galvanising
Training to R&D and Production personnel on Hot
Dip Galvanising
Treatment of textile effluents by
electro-chemical techniques
Uniaxial and biaxial fatigue ratchetting tests
on nuclear grade SA333 Gr.6 carbon steel and
AISI 304LN SS Ma
