|
S.N. |
Authors |
Title |
Source title |
Vol. |
Issue |
Page start |
Page end |
Impact factor |
|
1 |
Abhilash, Mehta K.D., Kumar
V., Pandey B.D., Tamrakar P.K. |
Bioleaching - An
alternate uranium ore processing technology for India |
Energy Procedia |
7 |
|
158 |
162 |
3.565 |
|
2 |
Abhilash, Pandey B.D. |
Role of ferric ions
in bioleaching of uranium from low tenor Indian ore |
Canadian Metallurgical
Quarterly |
50 |
2 |
102 |
112 |
0.4 |
|
3 |
Abhilash, Revati K., Pandey
B.D. |
Microbial synthesis
of iron-based nanomaterials - A review |
Bulletin of Materials
Science |
34 |
2 |
191 |
198 |
0.944 |
|
4 |
Abhilash, Venkat Raman R.,
Mehta K.D., Pandey B.D. |
Isolation and
growth kinetic studies of novel isolates from Indian Ocean
nodules |
Indian Journal of Marine
Sciences |
40 |
5 |
648 |
652 |
0.204 |
| 5 |
Agrawal A., Kumari S., Sahu
K.K. |
Studies on solvent
extraction of iron(iii) as a step for conversion of a waste
effluent to a value added product |
Journal of Environmental
Management |
92 |
12 |
3105 |
3111 |
2.596 |
|
6 |
Alex T.C., Kumar R., Roy
S.K., Mehrotra S.P. |
Anomalous reduction
in surface area during mechanical activation of boehmite
synthesized by thermal decomposition of gibbsite |
Powder Technology |
208 |
1 |
128 |
136 |
1.887 |
|
7 |
Alex T.C., Sasi Kumar C.,
Kailath A.J., Kumar R., Roy S.K., Mehrotra S.P. |
Analysis of
mechanically induced reactivity of boehmite using kinetics
of boehmite to γ-Al2O3 transformation |
Metallurgical and Materials
Transactions B: Process Metallurgy and Materials Processing
Science |
42 |
3 |
592 |
603 |
0.974 |
|
8 |
Aman
N., Mishra T., Hait J., Jana R.K. |
Simultaneous
photoreductive removal of copper (II) and selenium (IV)
under visible light over spherical binary oxide
photocatalyst |
Journal
of Hazardous Materials |
186 |
1 |
360 |
366 |
3.723 |
|
9 |
Balusamy T., Kumar S., Sankara Narayanan T.S.N. |
Electrochemical
Behaviour of Surface Modified AISI 304 Grade Stainless Steel
in Ringer's Solution |
Transactions of the Indian Institute of Metals |
64 |
4-5 |
507 |
511 |
0.093 |
|
10 |
Bhaskar
Raju G., Keerthi R., Latha S.S., Prabhakar S. |
Degradation of dyes
by UV/O3/H2O2 and electrooxidation techniques |
Water
Practice and Technology |
6 |
2 |
|
|
1.005 |
|
11 |
Bhattacharya M. |
Chemical synthesis
and characterization of nickel powder |
Metallurgical and Materials Transactions B: Process
Metallurgy and Materials Processing Science |
42 |
2 |
380 |
384 |
0.974 |
|
12 |
Bhattacharya S., Mallik D., Nayar S. |
Comparative study
of biomimetic iron oxides synthesized using microwave
induced and conventional method |
IEEE
Transactions on Magnetics |
47 |
6 PA |
1647 |
1652 |
1.052 |
|
13 |
Bhattacharyya A.S., Mishra S.K. |
Micro/nanomechanical
behavior of magnetron sputtered Si-C-N coatings through
nanoindentation and scratch tests |
Journal
of Micromechanics and Microengineering |
21 |
1 |
15011 |
|
2.281 |
|
14 |
Bui
Q.V., Nam N.D., Yoon J.W., Choi D.H., Kar A., Kim J.G., Jung
S.B. |
Effect of gold on
the corrosion behavior of an electroless nickel/immersion
gold surface finish |
Journal
of Electronic Materials |
40 |
9 |
1937 |
1942 |
1.421 |
|
15 |
Chakraborty J., Kumar K., Ranjan R., Chowdhury S.G., Singh
S.R. |
Thickness-dependent
fcc-hcp phase transformation in polycrystalline titanium
thin films |
Acta
Materialia |
59 |
7 |
2615 |
2623 |
3.781 |
|
16 |
Chatterjee Aveek , Srikanth S., Sanyal Suchismita, Anand K.
and Subramaniam P.R. |
Kinetic Modeling of
High Temperature Oxidation of Ni-base Alloys |
Computational Materials Science |
50 |
3 |
811 |
819 |
1.458 |
|
17 |
Chennakesavulu K., Basariya M.R., Sreedevi P., Bhaskar Raju
G., Prabhakar S., Rao S.S. |
Study on thermal
decomposition of calix[4]arene and its application in
thermal stability of polypropylene |
Thermochimica Acta |
515 |
01-Feb |
24 |
31 |
1.899 |
|
18 |
Chennakesavulu K., Raviathul Basariya M., Bhaskar Raju G.,
Prabhakar S. |
Study on thermal
decomposition of calix[6]arene and calix[8]arene |
Journal
of Thermal Analysis and Calorimetry |
103 |
3 |
853 |
862 |
1.752 |
|
19 |
Chi Dac
Tran, Jae-Chun Lee, Banshi Dhar Pandey, Jinki Jeong,
Kyoungkeun Yoo & Trung Hai Huynh |
Bacterial cyanide
generation in presence of metal ions and gold bioleaching
from waste PCBs |
Journal
of Chemical Engineering of Japan |
44 |
10 |
692 |
700 |
0.442 |
|
20 |
Chi,
Tran D.; Lee, Jae-chun; Pandey, B. D.; Yoo, Kyoungkeun;
Jeong, Jinki |
Bioleaching of gold
and copper from waste mobile phone PCBs by using a
cyanogenic bacterium |
Minerals Engineering |
24 |
11 |
1219 |
1222 |
1.241 |
|
21 |
Chowdhury S.G., Gubicza J., Mahato B., Chinh N.Q., Hegeds
Z., Langdon T.G. |
Texture evolution
during room temperature ageing of silver processed by
equal-channel angular pressing |
Scripta
Materialia |
64 |
11 |
1007 |
1010 |
2.806 |
|
22 |
Das A.,
Chakraborti P.C., Tarafder S., Bhadeshia H.K.D.H. |
Analysis of
deformation induced martensitic transformation in stainless
steels |
Materials Science and Technology |
27 |
1 |
366 |
370 |
0.705 |
|
23 |
Das A.,
Singh R., Bhattacharyya K.K. |
Split processing of
high ash Indian coking coal fines using Jameson flotation
cell |
Mineral
Processing and Extractive Metallurgy Review |
32 |
1 |
17 |
23 |
0.611 |
|
24 |
Das A.,
Sivaprasad S., Chakraborti P.C., Tarafder S. |
Connection between
deformation-induced dislocation substructures and martensite
formation in stainless steel |
Philosophical Magazine Letters |
91 |
10 |
664 |
675 |
1.262 |
|
25 |
Das A.,
Tarafder S., Chakraborti P.C. |
Estimation of
deformation induced martensite in austenitic stainless
steels |
Materials Science and Engineering A |
529 |
1 |
9 |
20 |
2.101 |
|
26 |
Das M.,
Das G. |
Role of dynamic
precipitation on the strengthening mechanism of cryorolled
6063 Al alloy |
Transactions of the Indian Institute of Metals |
64 |
01-Feb |
75 |
79 |
0.049 |
|
27 |
Das
S.K. |
Application of a
stochastic modelling framework to characterize the influence
of different oxide scales on the solid particle erosion
behaviour of boiler grade steel |
Sadhana
- Academy Proceedings in Engineering Sciences |
36 |
4 |
425 |
440 |
0.279 |
|
28 |
Das
S.K., Kumari A., Bandopadhay D., Akbar S.A., Mondal G.K. |
A mathematical
model to characterise effects of liquid hold-up on bosh
silicon transport in the dripping zone of a blast furnace |
Applied
Mathematical Modelling |
35 |
9 |
4208 |
4221 |
1.502 |
|
29 |
Das,
Arpan; Sivaprasad, S.; Chakraborti, P. C.; Tarafder, S. |
Morphologies and
characteristics of deformation induced martensite during low
cycle fatigue behaviour of austenitic stainless steel |
Materials Science and Engineering A-Structural Materials
Properties Microstructure and Processing |
528 |
27 |
7909 |
7914 |
2.101 |
|
30 |
Dhal,
Biswaranjan; Das, Nigama Nanda; Pandey, Banshi Dhar; Thatoi,
Hrudaya Nath |
Environmental
Quality of the Boula-Nuasahi Chromite Mine Area in India |
Mine
Water and the Environment |
30 |
3 |
191 |
196 |
1.039 |
|
31 |
Dlouhy
I., Tarafder M., Hadraba H. |
Micromechanical
aspects of transgranular and intergranular failure
competition |
Key
Engineering Materials: Materials Structure & Micromechanics
of Fracture VI |
465 |
Jan |
399 |
402 |
1 |
|
32 |
Gangopadhyay, A. K.; Sahoo, K. L.; Kelton, K. F. |
Importance of
solute-solute interactions on glass formability |
Philosophical Magazine |
91 |
17 |
2186 |
2199 |
1.302 |
|
33 |
Ghosh
M., Kumar K., Mishra R.S. |
Friction stir lap
welded advanced high strength steels: Microstructure and
mechanical properties |
Materials Science and Engineering A |
528 |
28 |
8111 |
8119 |
2.101 |
|
34 |
Ghosh
S., Sahu R.K., Raj C.R. |
Shape-regulated
high yield synthesis of electrocatalytically active branched
Pt nanostructures for oxygen reduction and methanol
oxidation reactions |
Journal
of Materials Chemistry |
21 |
32 |
11973 |
11980 |
5.1 |
|
35 |
Gopala
Krishna K., Singh N., Venkateswarlu K., Hari Kumar K.C. |
Tensile behavior of
ultrafine-grained Al-4Zn-2Mg alloy produced by cryorolling |
Journal
of Materials Engineering and Performance |
20 |
9 |
1569 |
1574 |
0.639 |
|
36 |
Guha
A., Sinha A. |
Surface
mineralization of hydrogels through octacalcium phosphate |
International Journal of Applied Ceramic Technology |
8 |
3 |
540 |
546 |
1.28 |
|
37 |
Gupta
S., Webster T.J., Sinha A. |
Evolution of PVA
gels prepared without crosslinking agents as a cell adhesive
surface |
Journal
of Materials Science: Materials in Medicine |
22 |
7 |
1763 |
1772 |
2.325 |
|
38 |
Hoang
Long Le; Jeong, Jinki; Lee, Jae-Chun; Pandey, Banshi D.; Yoo,
Jae-Min; Trung Hai Huyunh |
Hydrometallurgical
Process for Copper Recovery from Waste Printed Circuit
Boards (PCBs) |
MINERAL
PROCESSING AND EXTRACTIVE METALLURGY REVIEW |
32 |
2 |
90 |
104 |
0.611 |
|
39 |
Hore
S., Ghosh R.N. |
Computer simulation
of the high temperature creep behaviour of Cr-Mo steels |
Materials Science and Engineering A |
528 |
19-20 |
6095 |
6102 |
2.101 |
|
40 |
Humane
M.M., Minj R.K., Peshwe D.R., Paretkar R.K. |
Texture and
formability of one-step and two-step cold-rolled and
annealed interstitial free high-strength steel sheets |
Metallurgical and Materials Transactions A: Physical
Metallurgy and Materials Science |
42 |
6 |
1692 |
1708 |
1.721 |
|
41 |
Jamesh
M., Kumar S., Sankara Narayanan T.S.N. |
Effect of Thermal
Oxidation on Corrosion Resistance of Commercially Pure
Titanium in Acid Medium |
Journal
of Materials Engineering and Performance |
|
|
1 |
7 |
0.639 |
|
42 |
Jamesh
M., Kumar S., Sankara Narayanan T.S.N. |
Corrosion behavior
of commercially pure Mg and ZM21 Mg alloy in Ringer's
solution - Long term evaluation by EIS |
Corrosion Science |
53 |
2 |
645 |
654 |
3.261 |
|
43 |
Jena
B.K., Sahu S.C., Satpati B., Sahu R.K., Behera D., Mohanty
S. |
A facile approach
for morphosynthesis of Pd nanoelectrocatalysts |
Chemical Communications |
47 |
13 |
3796 |
3798 |
5.787 |
|
44 |
Jha
M.K., Choubey P., Kumari A., Kumar R., Kumar V., Lee J.-C. |
Leaching of lead
from solder material used in electrical and electronic
equipment |
TMS
Annual Meeting |
|
|
25 |
31 |
1.485 |
|
45 |
Jha
M.K., Kumar A., Kumar V., Lee J.-C. |
Prospective
scenario of E-waste recycling in India |
TMS
Annual Meeting |
|
|
73 |
80 |
1.485 |
|
46 |
Jha
M.K., Lee J.-C., Kumari A., Choubey P.K., Kumar V., Jeong J. |
Pressure leaching
of metals from waste printed circuit boards using sulfuric
acid |
Journal
of Metal (JOM) |
63 |
8 |
29 |
32 |
0.862 |
|
47 |
Kailath
A.J., Dutta K., Alex T.C., Mitra A. |
Crystallization
Study of Cu56Zr7Ti37 Metallic Glass by Electrical
Resistivity Measurement |
Journal
of Materials Science and Technology |
27 |
3 |
275 |
279 |
0.759 |
|
48 |
Kaloshkin S., Churyukanova M., Zadorozhnyi V., Shchetinin
I., Roy R.K. |
Curie temperature
behaviour at relaxation and nanocrystallization of Finemet
alloys |
Journal
of Alloys and Compounds |
509 |
Supp. |
S400 |
S403 |
2.134 |
|
49 |
Kim
E.-Y., Kim M.-S., Lee J.-C., Jeong J., Pandey B.D. |
Leaching kinetics
of copper from waste printed circuit boards by
electro-generated chlorine in HCl solution |
Hydrometallurgy |
107 |
03-Apr |
124 |
132 |
1.917 |
|
50 |
Kim
E.-Y., Kim M.-S., Lee J.-C., Pandey B.D. |
Selective recovery
of gold from waste mobile phone PCBs by hydrometallurgical
process |
Journal
of Hazardous Materials |
198 |
|
206 |
215 |
3.723 |
|
51 |
Kumar
K.S., Biswas K., Balasubramaniam R. |
Mechanism of film
growth of pulsed electrodeposition of nanocrystalline copper
in presence of thiourea |
Journal
of Nanoparticle Research |
13 |
11 |
6005 |
6012 |
3.253 |
|
52 |
Kumar
M., Awasthi R., Pramanick A.K., Singh R.N. |
New ternary mixed
oxides of Fe, Ni and Mo for enhanced oxygen evolution |
International Journal of Hydrogen Energy |
36 |
20 |
12698 |
12705 |
4.053 |
|
53 |
Kumar
S., Kumar R. |
Mechanical
activation of fly ash: Effect on reaction, structure and
properties of resulting geopolymer |
Ceramics International |
37 |
2 |
533 |
541 |
1.471 |
|
54 |
Kumar
S., Sankara Narayanan T.S.N. |
Evaluation of
corrosion behaviour of Ti-25Mo alloy in chloride medium |
Journal
of Applied Electrochemistry |
41 |
1 |
123 |
127 |
1.496 |
|
55 |
Kumar,
B. Ravi; Sharma, Sailaja; Mahato, B. |
Formation of
ultrafine grained microstructure in the austenitic stainless
steel and its impact on tensile properties |
Materials Science and Engineering A-Structural Materials
Properties Microstructure and Processing |
528 |
6 |
2209 |
2216 |
2.101 |
|
56 |
Lee
J.-C., Kim E.-Y., Kim J.-H., Kim W., Kim B.-S., Pandey B.D. |
Recycling of WC-Co
hardmetal sludge by a new hydrometallurgical route |
International Journal of Refractory Metals and Hard
Materials |
29 |
3 |
365 |
371 |
1..575 |
|
57 |
Mallik
D., Mir A., Bhattacharya S., Nayar S. |
Fluorimetric assay
of interaction of protein with ferrofluids |
Spectrochimica Acta - Part A: Molecular and Biomolecular
Spectroscopy |
78 |
1 |
332 |
336 |
1.77 |
|
58 |
Mandal
G.K., Das S.K., Balasubramaniam R., Mehrotra S.P. |
Evolution of
microstructures of galvanised and galvannealed coatings
formed in 0·2 wt-% aluminium-zinc bath |
Materials Science and Technology |
27 |
8 |
1265 |
1270 |
0.705 |
|
59 |
Mishra
D., Srivastava R.R., Sahu K.K., Singh T.B., Jana R.K. |
Leaching of
roast-reduced manganese nodules in NH3-(NH 4)2CO3 medium |
Hydrometallurgy |
109 |
03-Apr |
215 |
220 |
1.917 |
|
60 |
Mishra
S.K., Khusboo, Sherbakov V.A. |
Fabrication of
in-situ Ti-Si-C fine grained composite by the self
propagating high temperature synthesis (SHS) process |
International Journal of Refractory Metals and Hard
Materials |
29 |
2 |
209 |
213 |
1..575 |
|
61 |
Mishra,
T.; Mahato, M.; Aman, Noor; Patel, J. N.; Sahu, R. K. |
A mesoporous WN
co-doped titania nanomaterial with enhanced photocatalytic
aqueous nitrate removal activity under visible light |
CATALYSIS SCIENCE & TECHNOLOGY |
1 |
4 |
609 |
615 |
0.553 |
|
62 |
Mitra
A., Roy R.K., Mahato B., Panda A.K., Vlasak G., Janickovic
D., Svec Sr. P. |
Development of
FeSiB/CoSiB bilayered melt-spun ribbon melt-spinning
technique |
Journal
of Superconductivity and Novel Magnetism |
24 |
01-Feb |
611 |
615 |
1.014 |
|
63 |
Mukherjee K., Prakash S. |
Cold Simulation of
momentum transfer of a metal droplet falling through slag
systems possessing net-work structured fluids |
Chemical Engineering Science |
66 |
6 |
1027 |
1037 |
2.379 |
|
64 |
Mukherjee R., Sahu T., Sen S., Sahu P. |
Structural and
microstructural evolution due to increasing Co substitution
in Ni1-xCoxFe2O4: An X-ray diffraction study using the
Rietveld method |
Materials Chemistry and Physics |
128 |
3 |
365 |
370 |
2.353 |
|
65 |
Mukhopadhyay N.K., Ali F., Srivastava V.C., Yadav T.P.,
Sakaliyska M., Surreddi K.B., Scudino S., Uhlenwinkel V.,
Eckert J. |
Strain-induced
structural transformation of single-phase Al-Cu-Fe
icosahedral quasicrystal during mechanical milling |
Philosophical Magazine |
91 |
19-21 |
2482 |
2490 |
1.302 |
|
66 |
Murthy
G.V.S., Das G., Das S.K., Parveen N., Singh S.R. |
Hardbanding failure
in a heavy weight drill pipe |
Engineering Failure Analysis |
18 |
5 |
1395 |
1402 |
0.765 |
|
67 |
Murugananthan M., Latha S.S., Bhaskar Raju G., Yoshihara S. |
Role of electrolyte
on anodic mineralization of atenolol at boron doped diamond
and Pt electrodes |
Separation and Purification Technology |
79 |
1 |
56 |
62 |
2.774 |
|
68 |
Muthukumar M., Govindaraj M., Muthusamy A., Raju G.B. |
Comparative study
of electrocoagulation and electrooxidation processes for the
degradation of ellagic acid from aqueous solution |
Separation Science and Technology |
46 |
2 |
272 |
282 |
2.774 |
|
69 |
Narasimhan B.R.V., Kumar S., Narayanan T.S.N.S. |
Synthesis of
manganese zinc ferrite using ferrous pickle liquor and
pyrolusite ore |
Environmental Chemistry Letters |
9 |
2 |
243 |
250 |
2.051 |
|
70 |
Nayak
B. |
Gold in the beach
placer sands of Chavakkad-Ponnani, Kerala Coast, India |
Journal
of the Geological Society of India |
78 |
4 |
345 |
348 |
0.396 |
|
71 |
Nayak
B., Das S.K., Bhattacharyya K.K. |
Detrital and
authigenic(?) baddeleyite (ZrO2) in ferromanganese nodules
of Central Indian Ocean Basin |
Geoscience Frontiers |
2 |
4 |
571 |
576 |
0.5 |
|
72 |
Nayar
S., Guha A. |
A novel biomimetic
material - Glycine-PVA ferrofluid that crosses the
blood-brain barrier |
Journal
of Biomedical Nanotechnology |
7 |
1 |
78 |
|
2.626 |
|
73 |
Nizovskii, A.I.; Kalinkin, À. V.;
Shakhtshneider, T. P.; Dyakonova, M. A.; Myz,
S. A.; Boldyreva, E. V.; Kumar, Rakesh |
XPS study of
pharmacological substances mechanochemically immobilized on
the surface of alumina |
Journal
of Structural Chemistry |
52 |
sup. |
S137 |
S144 |
0.547 |
|
74 |
Nodland
D., Ghosh A., Zargarzadeh H., Jagannathan S. |
Neuro-optimal
control of helicopter UAVs |
Proceedings of SPIE - The International Society for Optical
Engineering |
8045 |
27-Apr |
|
|
0.822 |
|
75 |
Pal J.,
Ghorai S., Singh D.P., Goswami M.C., Bandyopadhyay D., Ghosh
D. |
Dissolution
characteristics of CO2-treated fluxed pellets in hot metal
bath |
Mineral
Processing and Extractive Metallurgy Review |
32 |
4 |
229 |
246 |
0.611 |
|
76 |
Palit
Sagar S., Metya A.K., Ghosh M., Sivaprasad S. |
Effect of
microstructure on non-linear behavior of ultrasound during
low cycle fatigue of pearlitic steels |
Materials Science and Engineering A |
528 |
6 |
2895 |
2898 |
2.101 |
|
77 |
Panda
A.K., Singh S., Roy R.K., Ghosh M., Mitra A. |
Effect of Mn
incorporation for Ni on the properties of melt spun off-stoichiometric
compositions of NiMnGa alloys |
Journal
of Magnetism and Magnetic Materials |
323 |
9 |
1161 |
1169 |
1.689 |
|
78 |
Parmar
K., Chongder D., Bandyopadhya N.R., Bhattacharjee S. |
Investigation on
Cu(II) adsorption on cobalt silicate precipitation tube
(CSPT) in aqueous medium |
Journal
of Hazardous Materials |
185 |
02-Mar |
1326 |
1331 |
3.723 |
|
79 |
Parveen
N., Murthy G.V.S. |
Determination of
elastic modulus in nickel alloy from ultrasonic measurements |
Bulletin of Materials Science |
34 |
2 |
323 |
326 |
0.944 |
|
80 |
Paul
S.K., Sivaprasad S., Dhar S., Tarafder S. |
Key issues in
cyclic plastic deformation: Experimentation |
Mechanics of Materials |
43 |
11 |
705 |
720 |
1.901 |
|
81 |
Paul
S.K., Sivaprasad S., Dhar S., Tarafder S. |
Cyclic plastic
deformation behavior in SA333 Gr. 6 C-Mn steel |
Materials Science and Engineering A |
528 |
24 |
7341 |
7349 |
2.101 |
|
82 |
Paul
S.K., Sivaprasad S., Dhar S., Tarafder S. |
Cyclic plastic
deformation and damage in 304LN stainless steel |
Materials Science and Engineering A |
528 |
15 |
4873 |
4882 |
2.101 |
|
83 |
Prasad
S. |
Extraction of
chromium as sodium chromate from stainless steel dust |
Journal
of Solid Waste Technology and Management |
37 |
01-Feb |
40 |
46 |
1 |
|
84 |
Prodhan,
A. |
Semisolid
processing of short and long freezing range Cu alloys by
electric current |
MATERIALS SCIENCE AND TECHNOLOGY |
27 |
10 |
1513 |
1517 |
0.705 |
|
85 |
Rajinikanth V., Venkateswarlu K. |
An investigation of
sliding wear behaviour of WCCo coating |
Tribology International |
44 |
12 |
1711 |
1719 |
1.557 |
|
86 |
Rajinikanth V., Venkateswarlu K., Sen M.K., Das M., Alhajeri
S.N., Langdon T.G. |
Influence of
scandium on an Al-2% Si alloy processed by high-pressure
torsion |
Materials Science and Engineering A |
528 |
3 |
1702 |
1706 |
2.101 |
|
87 |
Ranganathan S., Godiwalla K.M. |
Influence of
process parameters on reduction contours during production
of ferrochromium in submerged arc furnace |
Canadian Metallurgical Quarterly |
50 |
1 |
37 |
44 |
0.4 |
|
88 |
Ranganathan S., Godiwalla K.M., Chakraborty D. |
Investigation of
the kinetics of reduction of chromite ore lumps with large
particles of coke |
Transactions of the Institutions of Mining and Metallurgy,
Section C: Mineral Processing and Extractive Metallurgy |
120 |
2 |
71 |
78 |
1.46 |
|
89 |
Rao
D.S., Vijayakumar T.V., Prabhakar S., Raju G.B. |
Geochemical
assessment of a siliceous limestone sample for cement making |
Chinese
Journal of Geochemistry |
30 |
1 |
33 |
39 |
0.773 |
|
90 |
Rao
D.S., VijayaKumar T.V., Rao S.S., Prabhakar S., Raju G.B. |
Effectiveness of
sodium silicate as gangue depressants in iron ore slimes
flotation |
International Journal of Minerals, Metallurgy and Materials |
18 |
5 |
515 |
522 |
0.322 |
|
91 |
Rao
D.S., Vijayakumar T.V., Subba Rao S., Bhaskar Raju G.,
Prabhakar S. |
Beneficiation of a
low grade limestone sample |
Mining
Science and Technology (China) |
21 |
5 |
631 |
636 |
1.518 |
|
92 |
Ray
A.K., Kumar S., Krishna G., Gunjan M., Goswami B., Bose S.C. |
Microstructural
studies and remnant life assessment of eleven years service
exposed reformer tube |
Materials Science and Engineering A |
529 |
1 |
102 |
112 |
2.101 |
|
93 |
Ray
A.K., Tiwari Y.N., Krishna G., Das G., Gunjan M., Bose S.C.,
Ghosh R.N. |
Health assessment
of 22years service-exposed radiant tube from an oil refinery |
Engineering Failure Analysis |
18 |
3 |
1067 |
1075 |
0.765 |
|
94 |
Ray M.,
Ratan Bandyopadhyay N., Ghanta U., Klie R.F., Kumar
Pramanick A., Das S., Ray S.K., Minhaz Hossain S. |
Temperature
dependent photoluminescence from porous silicon
nanostructures: Quantum confinement and oxide related
transitions |
Journal
of Applied Physics |
110 |
9 |
094309 |
094309 |
1.55 |
|
95 |
Roy
R.K., Kernion S.J., Shen S., McHenry M.E. |
Crystallization
behavior and high temperature magnetic phase transitions of
Nb-substituted FeCoSiBCu nanocomposites |
Applied
Physics Letters |
99 |
19 |
0192506 |
0192506 |
3.82 |
|
96 |
Roy
R.K., Sarkar P., Singh S., Panda A.K., Mitra A. |
Crystallization
kinetics and giant magneto impedance behavior of FeCo based
amorphous wires |
TMS
Annual Meeting |
2 |
|
9 |
16 |
1.485 |
|
97 |
Roy
R.K., Singh S., Gunjan M.K., Panda A.K., Mitra A. |
Joining of 304SS
and pure copper by rapidly solidified Cu-based braze alloy |
Fusion
Engineering and Design |
86 |
04-May |
452 |
455 |
1.143 |
|
98 |
Rupa
P.K.P., Chakraborty P.C., Mishra S.K. |
Nanoindentation
studies of hard nanocomposite Ti-B-N thin films |
AIP
Conference Proceedings |
1393 |
|
239 |
240 |
3.596 |
|
99 |
Sahu
J.K., Das D.K., Nandy T.K., Mandal D., Rajinikanth V.,
Swaminathan J., Ray A.K. |
Effect of titanium
aluminide coating on cyclic plastic deformation and fatigue
life of a titanium alloy at 600°C |
Materials Science and Engineering A |
530 |
1 |
664 |
668 |
2.101 |
|
100 |
Sahu
S.K., Asselin E. |
Characterization of
residue generated during medium temperature leaching of
chalcopyrite concentrate under CESL conditions |
Hydrometallurgy |
110 |
01-Apr |
107 |
114 |
1.917 |
|
101 |
Sahu,
Ranjan K.; Pandey, Sudhir K.; Pathak, L. C. |
Valence and origin
of metal-insulator transition in Mn doped SrRuO(3) studied
by electrical transport, X-ray photoelectron spectroscopy
and LSDA plus U calculation |
Journal
of Solid State Chemistry |
184 |
3 |
523 |
530 |
2.261 |
|
102 |
Satapathy P.K., Behera R.K., Nayak A.K., Mishra T. |
Adsorptive removal
of phosphate from aqueous solutions using ceria-titania
mixed oxide |
Asian
Journal of Chemistry |
23 |
7 |
3055 |
3058 |
0.247 |
|
103 |
Sau
D.C., Biswal K.C. |
Computational fluid
dynamics and experimental study of the hydrodynamics of a
gas-solid tapered fluidized bed |
Applied
Mathematical Modelling |
35 |
5 |
2265 |
2278 |
1.502 |
|
104 |
Shakhtshneider T.P., Myz S.A., Dyakonova M.A., Boldyrev
V.V., Boldyreva E.V., Nizovskii A.I., Kalinkin A.V., Kumar
R. |
Mechanochemical
preparation of organic-inorganic hybrid materials of drugs
with inorganic oxides |
Acta
Physica Polonica A |
120 |
2 |
272 |
278 |
0.43 |
|
105 |
Singh
R., Swaminathan J., Paswan S., Rajinikanth V., Chattoraj I. |
Investigations on
high temperature corrosion of wire enameling oven |
Engineering Failure Analysis |
18 |
5 |
1375 |
1387 |
0.765 |
|
106 |
Singh
R., Tiwari S.K., Mishra S.K., Dahotre N.B. |
Electrochemical and
mechanical behavior of laser processed Ti-6Al-4V surface in
Ringer's physiological solution |
Journal
of Materials Science: Materials in Medicine |
22 |
8 |
1787 |
1796 |
2.325 |
|
107 |
Sivakumar B., Kumar S., Sankara Narayanan T.S.N. |
Fretting corrosion
behaviour of Ti-6Al-4V alloy in artificial saliva containing
varying concentrations of fluoride ions |
Wear |
270 |
03-Apr |
317 |
324 |
1.635 |
|
108 |
Sreedevi P., Chennakesavulu K., Kavitha M., Bhaskar Raju G.,
Prabhakar S. |
Electrokinetic
behavior of fluorite |
Journal
of Dispersion Science and Technology |
32 |
9 |
1306 |
1310 |
0.628 |
|
109 |
Sreedevi P., Chennakesavulu K., Raju G.B., Prabhakar S. |
Studies on the
zetapotential of calcite/p-sulfonatocalix[4,8]arenes |
Journal
of Dispersion Science and Technology |
32 |
11 |
1531 |
1536 |
0.628 |
|
110 |
Sujatha
G., Sinha A., Singh S. |
Cells behaviour in
presence of nano-scaffolds |
Journal
of Biomedical Nanotechnology |
7 |
1 |
43 |
44 |
2.626 |
|
111 |
Swaminathan J., Singh R., Gunjan M.K., Mahato B. |
Sensitization
induced stress corrosion failure of AISI 347 stainless steel
fractionator furnace tubes |
Engineering Failure Analysis |
18 |
8 |
2211 |
2221 |
0.765 |
|
112 |
Tiwari
S.K., Sahu R.K., Pramanick A.K., Singh R. |
Development of
conversion coating on mild steel prior to sol gel
nanostructured Al2O3 coating for enhancement of corrosion
resistance |
Surface
and Coatings Technology |
205 |
21-22 |
4960 |
4967 |
2.135 |
