- Email id : email@example.com
- Mobile/Phone no: 8987482643, 06572345240
- International : SCI Journals 1. J. Pal*, S. Ghorai, M. C. Goswami, S. Ghosh, D. Ghosh and D. Bandyopadhyay; Development of Fluxed Iron Oxide Pellets Strengthened by CO2 Treatment for Use in Basic Oxygen Steel Making; ISIJ Int., vol. 49, No. 2, (2009), pp 210-219. Weblink: https://www.jstage.jst.go.jp/article/isijinternational/49/2/49_2_210/_pdf 2. J. Pal*, M. C. Goswami, B. Mahato, S. Ghosh, D. Ghosh and D. Bandyopadhyay; High Temperature Characterization of CO2 Treated Fluxed Pellets Developed for Basic Oxygen Steel Making: ISIJ Int, Vol. 49, No. 9, 2009.pp1325-1332. Weblink: https://www.jstage.jst.go.jp/article/isijinternational/49/9/49_9_1325/_pdf/-char/en 3. J. Pal*, S. Ghorai, D. P. Singh, M. C. Goswami, D. Bandyopadhyay and D. Ghosh; Dissolution Characteristics of CO2 Treated Fluxed Pellets in Hot Metal Bath- Mineral Processing & Extractive Metall. Rev., 32: 229–246, 2011, pp. 229-246. DOI: 10.1080/08827508.2010.530717 Weblink: https://www.tandfonline.com/doi/pdf/10.1080/08827508.2010.530717?needAccess=true 4. J. Pal*, S. Ghorai, D. P. Singh, A. K. Upadhyay, S. Ghosh, D. Ghosh, D. Bandyopadhyay; Performance Assessment of CO2 Treated Fluxed Iron Oxide Pellets in Basic Oxygen Steel Making Process, ISIJ-Int. vol. 50, No-1, 2010, pp 105-114. Weblink: https://www.jstage.jst.go.jp/article/isijinternational/50/1/50_1_105/_pdf/-char/en 5. J. Pal*, S. Ghorai, M. C. Goswami, D. Ghosh, D. Bandyopadhyay and S. Ghosh, ‘Behavior of Fluxed Lime Iron-oxide Pellets in Hot Metal Bath during Melting and Refining, International Journal of Minerals, Metallurgy and Materials, vol 20, No. 4, April 2013, pp 329-337, DOI: https://doi.org/10.1007/s12613-013-0731-6 Weblink: https://link.springer.com/article/10.1007%2Fs12613-013-0731-6 6. J. Pal*, S. Ghorai, P. Venkatesh, M. C. Goswami, D. Bandyopadhyay, S. Ghosh, ‘Development of fluxed micro-pellets for sintering utilizing iron oxide wastes fines’, Ironmaking and Steelmaking, vol.40(7), 2013, pp 498-504, Published online: DOI: http://dx.doi.org/10.1179/1743281212Y.0000000069. Weblink: https://www.tandfonline.com/doi/pdf/10.1179/1743281212Y.0000000069?needAccess=true 7. J. Pal*, S. Ghorai, P. Venkatesh, M. C. Goswami, and D. Bandyopadhyay; Development of Prefused Synthetic Flux for Basic Oxygen Steel Making through Micro-Pelletization and Sintering of Iron Oxide Fines, Steel Research Int, 84(11) 2013, 1115–1125, No. DOI: https://doi.org/10.1002/srin.201200324 Weblink: https://onlinelibrary.wiley.com/doi/abs/10.1002/srin.201200324 8. Jagannath Pal*, Satadal Ghorai, Debajyoti Bandyopadhyay, Sukomal Ghosh • Performance Assessment of Partially Pre-fused Synthetic Flux in Basic Oxygen Steel Making, Journal of Iron and Steel Res Int., 22(10), 2015, pp. 916-923. DOI: https://doi.org/10.1016/S1006-706X(15)30090-X Weblink: https://link.springer.com/article/10.1016/S1006-706X(15)30090-X 9. Jagannath Pal*, Satadal Ghorai, and Avimanyu Das, Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making, International Journal of Minerals, Metallurgy and Materials, 22(2), Feb. 2015, pp.132-140. DOI: 10.1007/s12613-015-1053-7 https://ui.adsabs.harvard.edu/abs/2015IJMMM..22..132P/abstract 10. Jagannath Pal*, S. Ghorai, M. C. Goswami , Swatantra Prakash and T. Venugopalan, ‘Development of Pellet-Sinter Composite Agglomerate for Blast Furnace’ ISIJ International, Vol. 54 (2014), No. 3, pp. 620–627. DOI: http://dx.doi.org/10.2355/isijinternational.54.620 Weblink: https://www.jstage.jst.go.jp/article/isijinternational/54/3/54_620/_pdf/-char/en 11. Jagannath Pal*, Satadal Ghorai, Sanjay Agarwal, Bikash Nandi, Tapas Chakraborty, Goutam Das and Swatantra Prakash, ‘Effect of Blaine Fineness on the Quality of Hematite Iron Ore Pellets for Blast Furnace’ Mineral Processing and Extractive Metallurgy Review, 36 (2), 2015, pp. 83-91. DOI: : https://doi.org/10.1080/08827508.2013.873862 Weblink: https://www.tandfonline.com/doi/pdf/10.1080/08827508.2013.873862?needAccess=true 12. A. Ammasi, Jagannath Pal*, Replacement of bentonite in hematite ore pelletisation using a combination of sodium lignosulphonate and copper smelting slag, Ironmaking and Steelmaking, 2016 VOL 43 NO 3, pp 203-213. (as M. Tech. Supervisor) DOI: http://dx.doi.org/10.1179/1743281215Y.0000000033 Weblink: https://www.tandfonline.com/doi/pdf/10.1179/1743281215Y.0000000033?needAccess=true 13. Jagannath Pal*, Chelladurai Arunkumar, Yamuzala Rajshekhar, Gautam Das, Manik Chandra Goswami And Thirumalachari Venugopalan ‘Development on Iron Ore Pelletization Using Calcined Lime and MgO Combined Flux Replacing Limestone and Bentonite, ISIJ International, Vol. 54 (2014), No. 10, pp. 2169–2178. DOI: http://dx.doi.org/10.2355/isijinternational.54.2169 Weblink: https://www.jstage.jst.go.jp/article/isijinternational/54/10/54_2169/_pdf/-char/en 14. J. Pal*, S. Ghoaria, A. Ammasi, S.K. Hota, V.M. Koranne, T. Venugopalan, Improving reducibility of iron ore pellets by optimization of physical parameters, Journal of Mining and Metallurgy, Section B: Metallurgy, VOL 53(1), B (2017) pp. 37-46, DOI: 10.2298/JMMB151206014P Weblink: https://aseestant.ceon.rs/index.php/jmm/article/view/9674/4851 15. P. Ranjan and J. Pal*, Salt solution treatment to prevent the low temperature reduction degradation of haematite pellet, Ironmaking and Steelmaking, Published online, 2016, 43(9), pp. 688-696. (as M. Tech. Supervisor); DOI: https://doi.org/10.1080/03019233.2016.1138668 Web link https://www.tandfonline.com/doi/pdf/10.1080/03019233.2016.1138668?needAccess=true 16. J. Pal, T. Venugopalan, Carbon as in situ energy source in induration of hematite pellets and its effect on pellet properties, Ironmaking and Steelmaking, 42(2015), No 2, pp.139-147. DOI: : https://doi.org/10.1179/1743281214Y.0000000215 Weblink https://www.tandfonline.com/doi/pdf/10.1179/1743281214Y.0000000215?needAccess=true 17. Jagannath Pal*, Satadal Ghorai, Bikash Nandi, Tapas Chakraborty, Goutam Das and T. Venugopalan, Effect of pyroxenite and olivine minerals as source of MgO in hematite pellet on improvement of metallurgical properties, Journal of central South University August,Vol.22(9), 2015, pp 3302-3310. DOI: https://doi.org/10.1007/s11771-015-2870-6 Weblink: https://link.springer.com/article/10.1007/s11771-015-2870-6 18. J. Pal*, S. Ghorai, Y. Rajshekar and V. M. Koranne, Development of blast furnace quality pellet optimising blue dust, hard ore and friable ore ratio, Ironmaking and Steelmaking, 2017, vol 44(8), pp 568-576, DOI: https://doi.org/10.1080/03019233.2016.1222778 Weblink: https://www.tandfonline.com/doi/pdf/10.1080/03019233.2016.1222778 19. Md. Meraj, Susanta Pramanik and Jagannath Pal*, ‘ Role of MgO and its Different Minerals on Properties of Iron Ore Pellet’ Transaction IIM, August 2016, 69(6), pp 1141-1153 (as M. Tech. Supervisor) DOI: https://doi.org/10.1007/s12666-015-0676-8 Weblink: http://link.springer.com/article/10.1007/s12666-015-0676-8 20. Y. Rajshekar, J. Pal* and T. Venugopalan, Sintering characteristics and kinetics of acidic haematite ore pellets with and without mill scale addition, Iron making and steelmaking, Ironmaking and Steelmaking, 2018, 45(4), 325-334. (as Ph. D. Supervisor) https://doi.org/10.1080/03019233.2016.1264153 Weblink: https://www.tandfonline.com/doi/pdf/10.1080/03019233.2016.1264153?needAccess=true 21. Y. Rajshekar, Jagannath Pal* & T. Venugopalan, Mill scale as a potential additive to improve the quality of hematite ore pellet, Mineral Processing and Extractive Metallurgy Review, 2018, 39 (3), 202–210. (as Ph. D. Supervisor) DOI: https://doi.org/10.1080/08827508.2017.1415205 Weblink: https://www.tandfonline.com/doi/pdf/10.1080/08827508.2017.1415205?needAccess=true 22. Y. Rajshekar, J. Pal* and T. Venugopalan, Development of hematite ore pellet utilizing mill scale and iron ore slime combination as additive, Journal of Mining and Metallurgy, Section B: Metallurgy, 54(2), B, 2018 pp. 197-208. (as Ph. D. Supervisor) Weblink: https://aseestant.ceon.rs/index.php/jmm/article/view/16277/7145 23. Jagannath Pal*, Satadal Ghorai and T. Venugopalan, Effect of high Blaine iron ore fines in hematite ore pelletization for blast furnace, Mineral processing and extractive metallurgy, 129 (3-4), 2020, 299-307. DOI: https://doi.org/10.1080/25726641.2018.1505208 Weblink: https://www.tandfonline.com/doi/abs/10.1080/25726641.2018.1505208 24. Jagannath Pal*, Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes, Mineral processing and extractive metallurgy review, 40(4), 2019, pp. 248-264. DOI: https://doi.org/10.1080/08827508.2018.1518222 Weblink: https://www.tandfonline.com/doi/epub/10.1080/08827508.2018.1518222?needAccess=true 25. Sanjay Agarwal, Jagannath Pal and Dinabandhu Ghosh, ‘Development of Chromite Sinter from Ultra-Fine Chromite Ore by Direct Sintering’ ISIJ International, Vol. 54 (2014), No. 3, pp. 559–566. (as Ph. D. Supervisor). DOI: http://dx.doi.org/10.2355/isijinternational.54.559 Weblink: https://www.jstage.jst.go.jp/article/isijinternational/54/3/54_559/_pdf/-char/en 26. S. Agarwal, J. Pal and D. Ghosh, Smelting characteristics of fluxed chromite sinter and its performance assessment in electric arc furnace to produce high carbon ferrochrome, Ironmaking and steel making, Volume 43, Issue 2, 2016 , pp 97-111(as Ph. D. Supervisor) DOI: http://dx.doi.org/10.1179/1743281215Y.0000000054 Weblink: https://www.tandfonline.com/doi/pdf/10.1179/1743281215Y.0000000054?needAccess=true 27. B. Nandi, M.K. Chawdhary, J. Pal, D. Bhattachariya; ‘Sintering characteristics of Indian Chromite Ore Fines’, Met and Metl Trans B, vol. 40, No.5, 2009, pp 662-675. DOI: https://doi.org/10.1007/s11663-009-9268-5 Web link: https://link.springer.com/article/10.1007/s11663-009-9268-5 28. J. Pal*, D. Bandyopadhyay, D.P. Singh and Sukomal Ghosh; ‘A Comparative Study for Smelting of Chromite Ore, Pellets, Briquettes and Sinter’; Mineral Processing and Extractive Metallurgy, vol 117(3), 2008, pp 129-136. DOI: https://doi.org/10.1179/174328508X283469 Weblink https://www.tandfonline.com/doi/pdf/10.1179/174328508X283469?needAccess=true 29. J. Pal*, M. C. Goswami, Manjeet Singh and K. K. Singh; ‘Desulphurisation of High Sulphur coal to improve industrial utilization’; Ironmaking and Steelmaking, vol 30(6), pp 441-446. DOl : https://doi.org/10.1179/030192303225004141 Weblink: https://www.tandfonline.com/doi/pdf/10.1179/030192303225004141?needAccess=true • 30. D. Mondal, M. Ghosh, J. Pal, P. K. De, S. Ghoshchoudhury, S. Das, G. Das and S. Ghosh; Effect of Austempering treatment on microstructure and mechanical properties of high Si steel; J. Mater Science (2009), 44 pp 1069-1075. DOI: https://doi.org/10.1007/s10853-008-3203-z Weblink: https://link.springer.com/article/10.1007%2Fs10853-008-3203-z 31. D. Mandal, M. Ghosh, J. Pal, S. Ghosh Chowdhury, G. Das, S.K. Das, Sukomal Ghosh, ‘Evolution of microstructure and mechanical properties under different austempering holding time of cast Fe–1.5Si–1.5Mn–V steels’ , Materials and Design, 54, February 2014, pp 831–837. DOI: https://doi.org/10.1016/j.matdes.2013.09.005 Weblink: http://www.sciencedirect.com/science/article/pii/S0261306913008558 32. J. Pal*, S. Ghosh, M. C. Goswami, D. P. Singh, Manoj Kumar, R. K. Minj, A. K. Upadhyay; ‘Role of Direct reduced Iron Fines In Nitrogen Removal from Electric Arc Furnace Steel’, Steel Research International, vol 78, No 8, 2007, pp 588-594. Weblink : http://eprints.nmlindia.org/3457/1/jpal5.pdf 33.J. Pal*; ‘Thermodynamic Analysis of Nitrogen Removal through Gas Phase by DRI Fines Injection’; Ironmaking and Steelmaking’ , vol-33(6), 2006, pp 465-470. DOI: https://doi.org/10.1179/174328106X149824 Weblink: https://www.tandfonline.com/doi/pdf/10.1179/174328106X149824?needAccess=true 34. J.Pal*, M.C.Goswami and D. P. Singh; 'On the Desulphurisation of Assam Coal with Coke Oven Gas'- Trans. Indian Institute of Metal, Vol. 56, No. 3, June 2003, pp. 239-242. Weblink http://eprints.nmlindia.org/6270/ pdf link: http://eprints.nmlindia.org/6270/1/J_Pal.PDF 35. Ammasi Ayyandurai and Jagannath Pal*, ‘Reaction Mechanism of In-situ Carbon in Hematite Ore Pellet during Induration’ Mineral Processing and Extractive Metallurgy Review, Online, 2020, pp. 1-15. (as Ph. D. Supervisor); DOI: https://doi.org/10.1080/08827508.2020.1825954 Weblink: https://www.tandfonline.com/doi/epub/10.1080/08827508.2020.1825954?needAccess=true 36. J. Pal*, D. Prasad, T. Venugopalan, ‘Modified Coke Breeze Distribution In Iron Ore Sintering - A Novel Technique of Reducing Energy Consumption and Improving Quality’, J. Min. Metall. Sect. B-Metall. 57 (1) (2021) 73 – 82. DOI: https://doi.org/10.2298/JMMB200513001P Weblink: https://aseestant.ceon.rs/index.php/jmm/article/view/26560/17003 37. Ammasi Ayyandurai & Jagannath Pal*, ‘Blast Furnace Flue Dust as a Potential Carbon Additive in Hematite Ore Pellet’ Mineral Processing And Extractive Metallurgy Review, Online, 2021, pp. 1-15. (as Ph. D. Supervisor); DOI: https://doi.org/10.1080/08827508.2021.1914607 Weblink https://www.tandfonline.com/doi/epub/10.1080/08827508.2021.1914607?needAccess=true
- National : Other Journals 38. J. Pal* and M. C. Goswami; ‘Simple Mathematical Model to Control Silicon Sulphur and Manganese in Hot Metal During Blast Furnace Operation’- Journal of Metallurgy and Materials Science, vol. 43, No. 3, July- Sept, 2001, pp. 203-211. link: http://eprints.nmlindia.org/1324/ PDF LINK: http://eprints.nmlindia.org/1324/2/203-211.PDF 39. J. Pal*, Surinder Singh, A. K. Ghosh and Sunil Mohan; 'A Mathematical Model for End Point Control of Basic Oxygen Steel Making Furnace'-; J. of Met. and Mater Sc.; vol. 44, No. 2, April- June, 2002, pp. 39- 49. link: http://eprints.nmlindia.org/1272/ 40. Manoj Kumar, J. Pal* and S. Ghosh, ‘Performance of Sponge Iron Charging in Electric Arc Furnace’; J. Met. Mater Science, vol. 46(3), 2004, pp197-204. Link: http://eprints.nmlindia.org/1352/ 41. J. Pal*, P. N. Chaudhary and M.C. Goswami; 'Utilisation of LD slag - an Overview' - Journal of Metallurgy and Materials Science, vol. 45, No. 2, April- June, 2003, pp. 61-72. Link: http://eprints.nmlindia.org/5043/ 42. M. C. Goswami and J. Pal*; 'Role of Coke Quality in Improving Blast Furnace Performance'- ; Journal of Metallurgy and Materials Science; vol. 44, No. 3, July- Sept, 2002, pp. 91-102. Link: http://eprints.nmlindia.org/1275/ 43. J. Pal*, S. Ghorai, M. C. Goswami, D. Bandyopadhyay and S. Ghosh: Agglomeration of Waste Iron -oxide for Use in Steelmaking, Steel Tech, Vol. 6 No. 1 October, 2011, pp. 47-52. Link : http://eprints.nmlindia.org/4312/ PDF: http://eprints.nmlindia.org/4312/1/47-52.PDF 44. Jagannath Pal*, Utilization of microfines in iron and steel making, Steel world, vol 22(6), 2016, pp. 86-90. Link: http://eprints.nmlindia.org/7721/ 46. J. Pal*, M. C. Goswami and R. P. Goel; ‘Some Thermodynamic and Kinetic Aspects of Nitrogen Removal in Arc Furnace Steel Making’; Indian Foundry Journal, vol 51(6), 2005, pp 33-40. Link: http://eprints.nmlindia.org/2495/ 47. J. Pal*, M. C. Goswami; ‘Control of Silicon in Hot Metal’; J. Met. Mater Science, vol. 46(1), 2004, pp 23-38. Link: http://eprints.nmlindia.org/1374/ 48. M. C. Goswami; J. Pal and D. Bondyopadhyay; ‘Problems and prospect of Iron making in India’; JPC Bulletin, Feb, 2006 pp 25-32. 49. M. C. Goswami; J. Pal and D. P. Singh; ‘Improvement in Iron Making Process Performance through Characterization of Iron Ore, Sinter and Pellets’; IIM Metal News, vol. 10, No. 1, 2007, pp 27-31. 50. J. Pal*, S. Ghorai, M. C. Goswami, D. Bandyopadhyay, D. Ghosh and S. Ghosh; ‘Steel Plant Waste oxides as Advantageous Flux Materials in Basic Oxygen Steel Making Process’; JPC Bulletin, Special Issue January, (2008), pp 40-47. 51. D. Bandyopadhyay, S.D. Singh, A.K. Vaish, M.C. Goswami, J. Pal and S. Ghorai, ‘Iron and Steel: From Cradle to Crown’ Science and Culture Vol. 78, No. 11–12, 2012, pp 477-483. 52. Jagannath Pal, Sanjay Kumar, Y. Rajshekar and T. Venugopalan, ‘Development of carboncomposite iron ore slime briquettes for using in ironmaking’, J. Met. Mater Science, Vol 63, Accepted- in press Papers in Conference Proceedings 53. Elzohiery, Mohamed and Mohassab, Yousef and Pal, J and Zhang, Shengqin and Sohn, Hong Yong (2016) Reduction kinetics of magnetite concentrate particles with H2 + CO at 1200 to 1600 oC relevant to a novel Ironmaking process. TMS-2016, 7th International Symposium on High-Temperature Metallurgical Processing, Wiley, USA, pp. 35-41. Link http://eprints.nmlindia.org/7434/ PDF: http://eprints.nmlindia.org/7434/1/Magnetite_with_H2%2BCO.pdf 54. P. N. Choudhary, J. Pal, D. P. Singh, S. Ghosh, and M. Singh; ‘Utilisation of Steel Making Slag’; Proceeding of first IAS International Meeting on Environment and recycling, San Nicolas, Argentina, 9-10 Nov. 2005, pp.48-53- International Conf. 55. N. S. Randhawa, R. K. Jana, S. Agarwal, S. Ghorai, S. K. Maity and J. Pal; ‘Production of Fe-Mn-Si from leached sea nodules residue’; Proceedings of ‘MPT-2007’, March, Mumbai, pp 550-553. Link https://core.ac.uk/download/pdf/297715577.pdf 56. R.K. Jana, N. S. Randhawa, J. Pal, R.K. Minj and K.M. Godiwalla; ‘Recovery of manganese as ferro-silico-manganese alloy from leached sea nodule residue’ Proc. of ‘National Seminar on Polymetallic Nodules’, RRL, Bhubaneswar, Orissa, 29-30 September, 2005. Link http://eprints.nmlindia.org/4268/ 57. P. N. Chaudhari and J. Pal; ‘An Overview of Treatment of Steel Making Slag for Recovery of Lime and Phosphorus Value’- Proceedings of ROMM, 2002, pp. 186-190. Link http://eprints.nmlindia.org/4220/ 58. A. Ammasi, J. Pal, Influences of carbonaceous materials on the quality of hematite ore pellets, 3rd International conference on science and technology of ironmaking and steelmaking (STIS-2017), Kanpur, pp. 319-322. Link: http://eprints.nmlindia.org/7727/ PDF: http://eprints.nmlindia.org/7727/1/STIS_Ammasi_A.pdf
- Awarded : --
- Filed : --
- Developed : --
- Transferred : --
The current research area is on process metallurgy, especially, agglomeration, iron making, and steel making. Focusing on thermodynamic and kinetic analysis of the process, innovation, and new process development for industrial waste and micro fines utilization.
Concentrating on developing technology and process modification for energy reduction, waste utilization, quality, and productivity improvement. Supervising several M. Tech and Ph. D. Thesis.